Sirius Satellite Radio 10 manual Factory Default, Changing the Removable Faceplates

Factory Default

This Menu option is designed to restore all the original factory settings. To activate the Factory Default perform the following procedure while in the “Menu Options” List mode:

1.Use the CHANNEL Button to highlight the “Factory Default” option. Press the SELECT Button to select. “Restore Settings” will pop up on the CRSR-10’s display (below right).

2.Use the CHANNEL Button to highlight “Yes” to restore all the settings or select “No” to return to the Menu Options List Mode.

Note: If “Yes” is chosen, the unit reverts to the original factory settings for the following parameters:

All Presets revert to empty Display Brightness to 100% Display Contrast to 60% FM Transmitter to “On” Audio Output Level to 50% Memory Search On

Memory locations will be erased 12 Hour Clock Format Eastern time zone

Daylight savings time observed Program Alert Time OFF Program Alert Day Monday

Program Alert Channel Number (current ) Auto Shutdown Off

Sleep Mode Off

Changing the Removable Faceplates

1.To remove the faceplate, hold both sides of the CRSR-10 with one hand. Locate the indented tab on the bottom of the CRSR-10. Pull on the indented tab of the faceplate with the finger of your other hand and apply gentle pressure. The faceplate should snap off easily.

2.To add a faceplate, hold both sides of the CRSR- 10 with one hand. Pick up a faceplate with your other hand and place into position while making sure the indented tab remains on the bottom of the unit. Once lined up, the faceplate should snap on easily with gentle pressure on all four corners.

32
	Sanyo CRSR-10 User Guide

	33
Sanyo CRSR-10 User Guide