Sirius Satellite Radio 10 manual Changing the Lock/Unlock Code Audio Level Antenna Aiming

Changing the Lock/Unlock Code Audio Level

Antenna Aiming

When using the home antenna (included) or the optional BMBX-10 Boombox docking station indoors, it is important to position the antenna in an acceptable location (See the BMBX-10 installation guides for more information on the

4.Adjust the antenna for maximum performance by positioning the antenna where the above signals are the strongest. To exit this function, press the SELECT Button or the MENU button.

The first time the Lock/Unlock function is accessed, the user must enter the default lock code. The default lock code is “0000”. This code can be maintained or changed. To change the default lock code, perform the following procedure while in the “Menu Options” List mode:

1.Use the CHANNEL Button to highlight “Lock Options”. Press the SELECT Button to select.

2.Select “Edit Code” (top left) from the Lock Options Menu and press the SELECT Button to select.

3.Enter the default code “0000”.

4.The “Enter Code” prompt will appear. Enter your new four digit code using the 0-9 number buttons. (top right) You will then be prompted to confirm the new code by entering your code again.

5.The lock code is now changed.

Note: You can use this same method to Edit the code once it is changed from the default.

The audio output of the CRSR-10 can be adjusted to fine-tune the audio signal level for maximum performance. This is important when using the optional BMBX-10 Boombox Docking Station. To change the Audio Level, perform the following procedure while in the “Menu Options” List mode:

	Audio Level
-	+

1.Use the CHANNEL Button to highlight the “Audio Level ”. Press the SELECT Button to select.

2.Use the CHANNEL Button to adjust to the desired audio output level. A 10 segment horizontal bar graph is displayed with a “-” sign to the left and a “+” sign to the right. To select and exit this function, press the SELECT or MENU Button.

Boombox).

1.In the Menu Options screen, use the CHANNEL Button to highlight “Antenna Aiming”. Press the SELECT Button to select.

2.Two 10 segment horizontal bar graphs will be displayed ( SAT and TER) with a “-” sign to the left and a “+” sign to the right. SAT indicates a satellite signal and TER indicates a terrestrial signal – if available.

3.It is best to position the antenna on a window sill with a clear view of the sky.

Antenna Aiming

SAT	-	+
TERl	-
		+

26
	Sanyo CRSR-10 User Guide

	27
Sanyo CRSR-10 User Guide