Manuals / Zephyr / Kitchen Appliance / Ventilation Hood

Zephyr AK8800AG, AK8800AS manual Surface Maintenance, Installing Baffle Filters FIG

Models: AK8800AS AK8800AG

1 17
Download 17 pages 4.75 Kb
Page 14
Image 14

www.zephyronline.com

Cleaning and Installing Filters

! CAUTION: If this hood is installed in a salt water area (example: coast),

rinse all surfaces once a week with clear water (even if the hood is not used), and wipe dry completely.

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/ scoring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with the grain.

Baffle Filters

The filters are intended to trap residue and grease from cooking. Although the filters should never need replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install before using hood.

Maintenance –

Installing Baffle Filters (FIG 4):

1.Place filter into top groove of the power pack as shown and pull towards front of power pack using handles.

2.Pivot back of filter upwards so it is angled in the power pack.

3.Push filter into channel on back of power pack to lock into place.

Replacing/Ordering Baffle Filters:

 

Hood Model:

Part No.

Qty. to Order

AK8800Ax

50210010

2

1

3

2

FIG 4

12

Page 13 Page 15
Page 14
Image 14
Zephyr AK8800AG, AK8800AS manual Surface Maintenance, Installing Baffle Filters FIG
Page 13 Page 15

AK8800AS, AK8800AG specifications

The Zephyr AK8800AG and AK8800AS are cutting-edge microcontrollers designed for demanding applications in various industries. Their robust architecture and array of features make them suitable for tasks requiring high performance, efficiency, and reliability.

One of the primary features of the AK8800 series is its advanced ARM Cortex-M4 core, which provides a performance boost for processing complex algorithms while maintaining low power consumption. This makes the AK8800AG and AK8800AS ideal for battery-operated devices where energy efficiency is crucial. The 32-bit architecture supports high-speed processing, ensuring that real-time applications run smoothly without lags or interruptions.

Both models come equipped with an extensive memory system. They include up to 512KB of Flash memory and 128KB of SRAM, allowing for the storage of large programs and data sets. This substantial memory capacity enables developers to implement rich features in their applications without worrying about memory constraints. Additionally, the microcontrollers support external memory interfaces, facilitating the connection of additional storage options when more capacity is needed.

The AK8800 series is fortified with a wide range of integrated peripherals. These include a high-performance ADC (Analog-to-Digital Converter), SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit), UART (Universal Asynchronous Receiver-Transmitter), and GPIO (General Purpose Input/Output) pins. These peripherals enhance connectivity and allow for seamless integration with various sensors, actuators, and other devices, making the AK8800AG and AK8800AS versatile solutions for IoT applications, industrial automation, and consumer electronics.

In terms of connectivity, the Zephyr AK8800 series supports multiple communication protocols, including wireless technologies. This aspect is essential for modern applications requiring remote communication, enabling developers to create connected solutions effortlessly.

Moreover, the AK8800AG and AK8800AS microcontrollers are built to withstand harsh operating environments. They feature rugged designs and are able to operate in a wide temperature range, making them suitable for industrial settings where reliability is paramount.

In conclusion, the Zephyr AK8800AG and AK8800AS microcontrollers represent an excellent choice for developers seeking powerful and flexible solutions for their embedded systems. With their advanced processing capabilities, ample memory, comprehensive peripheral support, and robust design, they are poised to meet the challenges of our increasingly connected world. Whether for IoT applications, industrial automation, or consumer electronics, these microcontrollers provide the performance and reliability needed for success.