Important Safety Notice

READ AND SAVE THESE INSTRUCTIONS

www.zephyronline.com

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS FAN WITH ANY SOLID-STATE CONTROL DEVICE.

WARNING

TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a.Use this unit only in the manner intended by the manufacturer, if you have questions, contact the manufacturer.

b.Before servicing or cleaning unit, switch power off at service panel and lock panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

c.This unit must be grounded and protected by a GFCI.

d.Suitable for use in damp locations only when installed in a GFCI PROTECTED branch-circuit.

CAUTION

For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. Take care when using cleaning agents or detergents. Suitable for use in household cooking area.

WARNING

TO REDUCE THE RISK OF RANGE TOP GREASE FIRE:

a.Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

b.Always turn hood ON when cooking at high heat or when flaming food

c.Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

d.Use proper pan size. Always use cookware appropriate for the size of the surface element.

e.Keep fan, filters and grease laden surfaces clean.

f.Use high setting on hood only when necessary.

g.Don’t leave hood unattended when cooking.

h.Always use cookware and utensils appropriate for the type of and amount of food being prepared.

WARNING

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP FIRE, OBSERVE THE FOLLOWING:

a.SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

b.NEVER PICK UP A FLAMING PAN – You may be burned.

c.DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.

d.Use an extinguisher ONLY if:

1.You know you have a Class ABC extinguisher, and you already know how to operate it.

2.The fire is small and contained in the area where it started.

3.The fire department is being called.

4.You can fight the fire with your back to an exit

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

a.Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards. Including fire-rated construction.

b.Sufficient air is needed for power combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back-drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA) and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE) and the local code authorities.

c.When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

d.Ducted fans must always vent to the outdoors.

e.If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application and be connected to a GFI (Ground Fault Interrupter protected branch circuit).

g.NEVER place a switch where it can be reached from a tub or shower.

h.Make sure the power is off before installing, wiring or maintenancing.

WARNING

TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

2

Page 4
Image 4
Zephyr AK8800AG, AK8800AS manual Important Safety Notice, To Reduce the Risk of Range TOP Grease Fire

AK8800AS, AK8800AG specifications

The Zephyr AK8800AG and AK8800AS are cutting-edge microcontrollers designed for demanding applications in various industries. Their robust architecture and array of features make them suitable for tasks requiring high performance, efficiency, and reliability.

One of the primary features of the AK8800 series is its advanced ARM Cortex-M4 core, which provides a performance boost for processing complex algorithms while maintaining low power consumption. This makes the AK8800AG and AK8800AS ideal for battery-operated devices where energy efficiency is crucial. The 32-bit architecture supports high-speed processing, ensuring that real-time applications run smoothly without lags or interruptions.

Both models come equipped with an extensive memory system. They include up to 512KB of Flash memory and 128KB of SRAM, allowing for the storage of large programs and data sets. This substantial memory capacity enables developers to implement rich features in their applications without worrying about memory constraints. Additionally, the microcontrollers support external memory interfaces, facilitating the connection of additional storage options when more capacity is needed.

The AK8800 series is fortified with a wide range of integrated peripherals. These include a high-performance ADC (Analog-to-Digital Converter), SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit), UART (Universal Asynchronous Receiver-Transmitter), and GPIO (General Purpose Input/Output) pins. These peripherals enhance connectivity and allow for seamless integration with various sensors, actuators, and other devices, making the AK8800AG and AK8800AS versatile solutions for IoT applications, industrial automation, and consumer electronics.

In terms of connectivity, the Zephyr AK8800 series supports multiple communication protocols, including wireless technologies. This aspect is essential for modern applications requiring remote communication, enabling developers to create connected solutions effortlessly.

Moreover, the AK8800AG and AK8800AS microcontrollers are built to withstand harsh operating environments. They feature rugged designs and are able to operate in a wide temperature range, making them suitable for industrial settings where reliability is paramount.

In conclusion, the Zephyr AK8800AG and AK8800AS microcontrollers represent an excellent choice for developers seeking powerful and flexible solutions for their embedded systems. With their advanced processing capabilities, ample memory, comprehensive peripheral support, and robust design, they are poised to meet the challenges of our increasingly connected world. Whether for IoT applications, industrial automation, or consumer electronics, these microcontrollers provide the performance and reliability needed for success.