INSTALLATION
5
DUCTLESS CONVERSION
Ductless conversion is intended for applications where an exhaust duct work is not possible to be installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. Fumes and exhaust from cooking is drawn and filtered by a set of optional Carbon Filters. The air is then purified and
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing new duct work, if possible. The hood is most effective and efficient as an Exhaust unit. Only when the exhaust option is not possible should you recourse to converting the hood into a "purifying" unit.
When converted to be a "purifying" unit, a set of Carbon Filters are required on top of its standard Metal Filter set. Order according to its Part number below. The standard Metal Filters are intended to capture residue from cooking and the optional Carbon Filters help to purify fumes exhausted from cooking for
Carbon Filters (Required)
1.Purchase ductless Charcoal Filters as follow:
Hood Model: | Part No. | Filters in pkg. |
2 | ||
|
|
|
2.Remove metal filters on hood. Clip carbon filters onto each slot opening.
3.
4.Turn on Filter Change Indicator on control panel (refer details pg. 7)
5.Carbon Filters must be replace after every
120 hours of use (or approximately every 2 to 3 months based on the average of 1- 2hrs. of daily cooking time). The microprocessor in the controls when set, will elapsed and count usage time and indicate when carbon filter replacement is required every 120 hrs.
6" T connector or 90 elbow
6" straight pipe
wall pipe strap
Ducting
1.Install a 6" straight pipe and a "T" connector/ or a 90 elbow to divert air through louvers on duct cover.
2.You may also order our air diverting duct kit; call
