11
Optional RTU Wall Placement
The Hotwire 5620 RTU is designed for tabletop placement. The RTU can also be
mounted on a wall. To mount an RTU, you will need:
-Three slotted-head #6 self-threading screws with molly bolts
-Drill and 3/16I drill bit for the molly bolts
-Screwdriver
A template with the dimensions for the three screws is provided. See

RTU Hardware

Template

on page 12.
"Procedure
To mount the RTU:
1. Use a drill to install the plastic anchors (molly bolts).
2. Use a screwdriver to install the screws. Do not install the screws flush with the
wall. Leave enough clearance to hang the RTU housing from the screws.
Wall
Fasteners
98-16170
Hotwire
RTU