Zhone Technologies 6211, 6210 installation instructions Cord, Connect the Power, Receptacle to

6210 Bridge and 6211 Bridge/Router Quick Installation Instructions

Document Number 6210-A2-ZZ13-10

December 2005

1Connect the LINE port of the modem

to your DSL line using the supplied phone

cord.

RESET

LINE PHONE USB LAN DEFAULT POWER

04-17517

2Connect the TELEPHONE port of the modem to

your telephone using the cord that came with your telephone.

OR	4	Connect the POWER
		receptacle to the
		power supply and plug
		the power supply into
	3	a wall outlet.
	Connect either:
	The LAN port of the modem to a
	10/100BaseT Ethernet network
	interface card on your PC, or to
	hub or switch in your network. An
	Ethernet cable is supplied with your
	modem.
	or
	The USB port of the modem to a
	free USB port on your PC.

If you connected the USB port of the modem to your PC, the Found New Hardware Wizard appears on your computer screen. Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard.

See the user’s guide on the CD for important safety instructions and more information.

*6210-A2-ZZ13-10*

*6210-A2-ZZ13-10*

Copyright © 2005 Zhone Technologies, Inc. All rights reserved.