Zoom 4410A Installing and connecting on Windows XP, 2000, Me and 98SE

Follow the prompts to complete the installation.

Windows 2000 users: If the Digital Signature Not Found message appears, click Yes to continue.

5 On the final screen, click Finish.

6 On the Zoom installation screen, click Exit, remove the installation CD, then turn off your computer.

(If the Zoom screen is minimized to a button on the taskbar, maximize the screen so you can exit the installation.)

7 While the computer is off, plug the USB adapter into a USB port on your computer.

8 Turn the computer back on. Windows will find your new hardware. If you see an Unsigned driver message, click Continue anyway.

Installing and connecting on Windows XP, 2000, Me and 98SE

1 Insert the USB Adapter CD into your CD drive. The CD should start automatically. (If it does not, on the Windows desktop click the Start button, click Run, and then type e:\setup.exe where e is the letter of your CD drive.)

2 On the Language Selection screen, select your language.

3 On the next screen select Installation Wizard, and then on the following screen select USB.

Windows Me users: if prompted, restart your computer.