![](/images/new-backgrounds/1193731/19373141x1.webp)
3 | If you selected Custom Bridged IP or Routed IP or |
| Classical IP in Step 1 on page 15: |
You’ll see a dialog box with choices like those below.
•Select the Encapsulation Mode.
•Enter the VPI and VCI numbers.
Note: Your provider should have supplied you with this information. If not, you will need to request it. You may also refer to the tables on page 5 and 16.
•Click Apply and then OK.
4 You’re done! Turn to page 12 to connect to the Internet.
Appendix A: Custom Installation Instructions | 21 |