Zoom X4 - page 12

12 X4 ADSL Modem User’s Manual
a
aa
a Check that the VPI, VCI, and Encapsulation settings
match those supplied by your service provider. (Refer to
the table on page 5 if necessary or consult your provider.)
b
bb
b Enter the User Name and Password supplied by your
service provider.
c
cc
c Optional: Enter a Service Name if your service provider
has given you one.
d
dd
d Click Save Changes and then click Write Settings to
Flash and Reboot. Once the reboot is complete and the
unit has reset itself (when the front panel’s LINK light
remains on steady again), your X4 is ready to use. You
can open another Web browser or use the one that is
already open to access the Internet.
IMPORTANT:
Every time you make changes to the Basic Setup page,
you must click the Save Changes button and then the
Write Settings to Flash and Reboot button. A
Confirm page displays; click the button to complete the
process. If not, any changes will be lost when you
navigate to another page.