Zoom X4 - page 23

Chapter 2: Advanced Setup Options 23
LAN IP address range; for example, 10.0.0.4 and 10.0.0.15.
Your Host IP Address should be a static IP address outside of
this range—say, 10.0.0.16.
To set this static IP address, go to Start | Settings | Network
and Dial-up Connections. Right-click Local Area
Connection, select Properties, highlight your NIC card’s
TCP/IP entry and click Properties.
Note: These TCP/IP instructions and screenshot are typical of a
computer using Windows 2000 or XP; if you are using
Windows 98 or Me, yours may differ slightly. If you are a
Macintosh or Linux user and need help with your TCP/IP
settings, turn to the Appendix on page 51.
a
aa
a Click the radio buttons Use the following IP address and
Use the following DNS server addresses.
b
bb
b Fill in the Properties dialog box by entering the following
addresses.
IMPORTANT: You must complete all four fields.
IP address 10.0.0.16
Subnet mask 255.255.255.0
Default gateway (X4’s LAN IP address) 10.0.0.2
Preferred DNS server 10.0.0.2
c
cc
c Click OK.