CDMA2000 1X
Guide
Installation Guide
Install
1.Please connect Data Terminal to PC through USB interface. You could use the data cable to connect.
2.The installation driver will automatically run. Please install according to the installation wizard.
3.The system will automatically find new hardware and install the driver. Wait for a while. Click “Finish” after the installation is completed.
Note:
Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position.
Uninstall
4.Select Start
All Programs
Cricket Broadband
Uninstall Cricket Broadband, and you will be asked if you want to remove the program. Click “Yes”.
5.Please wait and then click “OK” when
Descriptions of icons
The icons on the interface:
INTERNET | |
CONNECTION | TEXT |
LOG | MESSAGE |
The icons on the Status Bar:
CDMA 1X | 1X indication |
| Connection indication |
|
|
|
|
EVDO Rev.0/ | EVDO network indication |
| Unread message indication |
Rev.A |
|
|
|
|
|
|
|
| Signal strength indication, |
| CDMA network unavailable |
| the more bars there are, the |
|
|
| stronger the signal is. |
|
|
NetConnect
1. Click | to connect the internet. Once connected, the “Connect” button will change |
to “Disconnect”. |
|
2. Click | to disconnect from Internet. |
3.Please connect the Data Terminal and PC with USB extension cable under weak signal to obtain the optimal performance. If necessary, adjust the Data Terminal's position and the antenna's direction.
ZTE Corporation | 6 | http://www.zte.com.cn |
