Manuals / Brands / Computer Equipment / Network Router / ZTE / Computer Equipment / Network Router

ZTE ZXDSL 831, ZXDSL 831B 3.2 Hardware Connection, Rear panel, Connection

1 20

Download 20 pages, 209.29 Kb

ZXDSL 831/831B/831II/831BII User’s Manual

Rear panel

		Figure 3.1-2 Rear Panel of the ZXDSL 831/831B/831II/831BII
		Table 3.1-2 Description of Interfaces on the Rear Panel

	Item	Introduction
	DSL	RJ-11 connection interface: The equipment is connected to the ADSL line or
	DSL	splitter via the telephone line.
		splitter via the telephone line.
		In the power-on state, you can restore the system to the default configuration
	Reset	by using a thin needle to press this slot for three seconds or for three
	Reset	executive times.
		executive times.
	Ethernet	RJ-45 connection interface: Connect it to the PC computer or other network
	Ethernet	devices using the network cable.
		devices using the network cable.
		Power switch
	PWR	Power interface. Connect it to the power adapter.

3.2 Hardware Connection

Connection 1

The following connection method is recommended. Figure 3.2-1 shows the connection between a ZXDSL 831/831B/831II/831BII, computer, splitter and telephones.

8