ZyXEL Communications 1 manual Vlan Configuration via EMS

NetAtlas Support Notes

VLAN Configuration via EMS

In this section, we will give an example to illustrate how to use EMS to create a VLAN2 in GS-4024. Here are the procedures.

Step 1: In the device panel list shown in Figure 12, right-click Configuration, Switch Configuration and then Switch Setup tab as shown in Figure 12 and Figure 13.

Step 2: Define the VLAN type, there are two types of VLAN, one is 802.1Q and the other is Port-based VLAN. Select 802.1Q as the VLAN type and click Apply in the Figure 14.

Figure 12 Device panel list

Figure 13 Switch Configuration

20

All contents copyright (c) 2006 ZyXEL Communications Corporation.