Prestige 2602R Series Quick Start Guide

•Web Configurator Internet Access Wizard

You will need your Internet access information such as user name and password if given by your ISP.

ISP INFORMATION

ENCAPSULATION METHOD YOU ARE USING

None

RFC1483 in bridged mode with a dynamic IP address or

 

ENET ENCAP with a dynamic IP address

 

 

An IP address only

RFC1483 in routing mode with a static IP address

 

 

A user name and password (and an IP address)

PPPoA or PPPoE encapsulation (with a static IP address)

 

 

An IP address, subnet mask and a gateway IP

ENET ENCAP with a static IP address

address

 

 

 

2.1 Zero Configuration

Launch your web browser and navigate to any web site (for example, www.zyxel.com). The Prestige automatically detects and configures your Internet connection. This may take about two minutes.

If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Click Apply.

Note: Zero Configuration can only automatically configure the device for Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the web configurator Internet Access Wizard to manually configure the device.

If you want to set up a SIP account for VoIP calls, you should also configure the voice configuration wizard screen (see Section 2.2.2 on page 6) or the Voice screen under Advanced Setup.

4