ZyWALL 2

Step 1. Click Wizard Setup in the main menu to display the first wizard screen.

System Name is for identification purposes.

Enter your computer's "Computer Name".

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this blank, the domain name obtained by DHCP from the ISP is used. Click Next to continue.

Step 2. The second wizard screen has three variations depending on what encapsulation type you use. Use the information in Internet Account Information to fill in fields.

Choose Ethernet when the WAN port is used as a regular Ethernet. Choose from Standard or a RoadRunner version. You’ll need User Name, Password and Login Server IP Address for some Roadrunner versions.

Point-to-Point Protocol over Ethernet (PPPoE) also functions as a dial-up connection. Therefore you’ll also need a username and password and possibly the PPPoE service name. Your ISP will give you all needed information.

Choose PPTP if your service provider uses a DSL terminator with PPTP login. The ZyWALL must have a static IP address in this case. You’ll also need a login name, associated password, the DSL terminator IP address and possibly a connection ID. Click Next to continue.

Step 3. Fill in the fields and click Finish to save and complete the wizard setup.

7