ZyWALL 30W

6.Click Advanced. Remove any previously installed gateways in the IP Settings tab and click OK to go back to the Internet Protocol TCP/IP Properties screen.

7.Click Obtain DNS server address automatically if you do not know your DNS server IP address(es).

If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields.

If you have more than two DNS servers, click Advanced, the DNS tab and then configure them using Add.

8.Click OK to close the Internet Protocol (TCP/IP) Properties window.

9.Click OK to close the Local Area Connection Properties window.

Checking Your Computer’s IP Address

1.In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2.In the Command Prompt window, type "ipconfig" and then press ENTER. Your computer’s IP address must be in the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0 in order to communicate with the ZyWALL.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems.

Configuring Your ZyWALL

Choose one of these methods to access and configure the ZyWALL. This Quick Start Guide shows you how to use the web configurator wizard only. See your User’s Guide for background information on all ZyWALL features and SMT configuration. Click the web configurator online help for screen-specific web help.

Web Configurator

SMT (System Management Terminal). Access the SMT via:

oConsole port using terminal emulation software o LAN, WLAN or WAN using Telnet

6