ZyXEL Communications 650 Series Table 27-2Menu 11.3 Remote Node Network Layer Options, Figure 27-3Menu 11.3 Remote Node Network Layer Options

	Prestige 650 Series User’s Guide
Menu 11.3 - Remote Node Network Layer Options
IP Options:	Bridge Options:
IP Address Assignment= Dynamic	Ethernet Addr Timeout (min)= N/A
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies= 3,4,5,6

Press ENTER to Confirm or ESC to Cancel:

Figure 27-3 Menu 11.3 Remote Node Network Layer Options

The next table explains fields in Menu 11.3 – Remote Node Network Layer Options.

Table 27-2 Menu 11.3 Remote Node Network Layer Options

FIELD	DESCRIPTION	EXAMPLE
IP Address	Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote	Dynamic
Assignment	node is using a dynamically assigned IP address or Static if it is using a
	static (fixed) IP address. You will only be able to configure this in the ISP
	node (also the one you configure in menu 4). All other nodes are set to
	Static.
Rem IP Addr	This is the IP address you entered in the previous menu.
Rem Subnet	Type the subnet mask assigned to the remote node.
Mask
My WAN	Some implementations, especially UNIX derivatives, require separate IP
Addr	network numbers for the WAN and LAN links and each end to have a
	unique address within the WAN network number. In that case, type the IP
	address assigned to the WAN port of your Prestige.
	NOTE: Refers to local Prestige address, not the remote router address.
NAT	Press [SPACE BAR] and then [ENTER] to select Full Feature if you have	SUA Only
	multiple public WAN IP addresses for your Prestige.
	Select SUA Only if you have just one public WAN IP address for your
	Prestige. The SMT uses Address Mapping Set 255 (menu 15.1 - see
	section 30.3.1).
	Select None to disable NAT.

Remote Node Configuration 27-7