ZyXEL Communications 650 Series 43.2.1 Internal SPTGEN File Modification - Important Points to Remember, Input, Input, Configured, Field Identification Number, Field Identification Number

Prestige 650 Series User’s Guide

This is the name of the menu.

This is the Field Name column.

This is the name of the field as seen in the corresponding SMT screen. Example: Configured

One “=” sign, followed by one space, must precede everything you input.

/ Menu 1 General Setup
	10000000	=	Configured	<0(No) 1(Yes)>	=	1
	10000001	=	System Name	<Str>	=	Prestige
	10000002	=	Location	<Str>	=
	10000003	=	Contact Person’s Name	<Str>	=	1
	10000004	=	Route IP	<0(No) 1(Yes)>	=
	10000005	=	Route IPX	<0(No) 1(Yes)>	=	0
	10000006	=	Bridge	<0(No) 1(Yes)>	=	0

This is the Field	This is the Parameter Values Allowed
Identification Number	column.
column.	This column defines acceptable
This column numerically	parameters. Parameters are usually
identifies the Field Name	numbers, but can sometimes be strings
column entries.	(<Str> indicates a string). All parameters
Example: 10000000	should be entered in the Input column.
	Example: <0(No) 1(Yes)>

The Input column. Input values to the right of the “=” sign.

Make sure one equal sign, followed by one space, precedes your input.

Figure 43-1 Configuration Text File Format: Column DescriptionsDO NOT alter or delete any field except parameters in the Input column.

For more text file examples, refer to the Example Internal SPTGEN Screens Appendix.

43.2.1 Internal SPTGEN File Modification - Important Points to Remember

•Each parameter you enter must be preceded by one “=”sign and one space.

•Some parameters are dependent on others. For example, if you disable the Configured field in menu 1 (see Figure 43-1),then you disable every field in this menu.

•If you enter a parameter that is invalid in the Input column, the Prestige will not save the configuration and the command line will display the Field Identification Number. Figure 43-2,shown next, is an example of what the Prestige displays if you enter a value other than “0” or “1” in the Input column of Field Identification Number 1000000 (refer to Figure 43-1).

43-2 Internal SPTGEN