Prestige 650H-E

The Prestige automatically logs you out if it is left idle for five minutes;

press ENTER to log back in again.

4.2 Common Screen Command Buttons

The following table shows common command buttons found on many web configurator screens.

Back

Click Back to return to the previous screen.

 

 

Apply

Click Apply to save your changes back to the Prestige.

 

 

Reset/Cancel

Click Reset or Cancel to begin configuring this screen afresh.

 

 

4.3 Internet Access Using the Wizard

Use the Wizard Setup screens to configure your system for Internet access settings and fill in the fields with the information in the Internet Account Information table. Your ISP may have already configured some of the fields in the wizard screens for you.

Step 1. In the Site Map screen click Wizard Setup to display the first wizard screen.

From the Mode drop-down list box, select Routing (default) if your ISP allows multiple computers to share an Internet account. Otherwise select Bridge.

Select the encapsulation type your ISP uses from the Encapsulation drop-down list box. Choices vary depending on what you select in the Mode field.

Select the multiplexing method used by your ISP from the Multiplex drop-down list box.

Enter the correct Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers supplied by your ISP in the VPI and VCI fields. These fields may already be configured.

Click Next.

Figure 6 Wizard Screen 1

Step 2. The second wizard screen varies depending on what mode and encapsulation type you use. All screens shown are with routing mode. Configure the fields and click Next to continue.

10