Prestige 650 ADSL Router
Figure 2-5 P650 with ADSL over ISDN
2.6Turning On Your Prestige
At this point, you should have connected the DSL, LAN 10/100M, console and power ports to the appropriate devices. Make sure the power adapter is plugged into an appropriate power source and the power switch (located on the back of your Prestige) is “on” (or pressed).
2.7Configuring Your Prestige For Internet Access
Configure your Prestige for Internet access using: Web Configurator (refer to the Read Me First)
SMT (System Management Terminal). Access the SMT via: o LAN or WAN using Telnet
o Console port using terminal emulation software
The remainder of this user’s guide shows you how to configure the Prestige for Internet access using SMT screens. There are also some sections in this guide that also focus on using Telnet to configure the Prestige.
2.7.1 Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization. After the initialization, the Prestige asks you to press [ENTER] to continue, as shown.
Hardware Installation and Initial Setup |