Prestige 650 ADSL Router

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Encapsulation

PPPoE (Point-to-Point Protocol over Ethernet).

PPPoE

 

PPPoA refers to RFC-2364 (PPP Encapsulation over

 

 

ATM Adaptation Layer 5).

 

 

If RFC-1483 (Multiprotocol Encapsulation over ATM

 

 

Adaptation Layer 5) of ENET ENCAP are selected,

 

 

then the Rem Login, Rem Password, My Login, My

 

 

Password, Edit PPP Options and Authen fields are not

 

 

applicable (N/A).

 

Multiplexing

Press [SPACE BAR] and then [ENTER] to select the

LLC-based

 

method of multiplexing that your ISP uses, either VC-

 

 

based or LLC-based.

 

Service Name

When using PPPoE encapsulation, type the name of

 

 

your PPPoE service here.

 

 

 

 

Incoming:

Type the login name that this remote node will use to

 

Rem Login

call your Prestige. The login name and the Rem

 

Password will be used to authenticate this node.

 

 

 

Rem Password

Type the password used when this remote node calls

 

 

your Prestige.

 

 

 

 

Outgoing:

Type the login name assigned by your ISP when the

 

My Login

 

Prestige calls this remote node.

 

 

 

 

 

 

My Password

Type the password assigned by your ISP when the

 

 

Prestige calls this remote node.

 

Authen

This field sets the authentication protocol used for

 

 

outgoing calls. Options for this field are:

 

 

CHAP/PAP – Your Prestige will accept either CHAP or

 

 

PAP when requested by this remote node.

 

 

CHAP – accept CHAP (Challenge Handshake

CHAP/PAP

 

Authentication Protocol) only.

 

 

PAP – accept PAP (Password Authentication Protocol)

 

 

only.

 

Route

This field determines the protocol used in routing.

IP

 

Options are IP and None.

 

Bridge

When bridging is enabled, your Prestige will forward any

No

 

packet that it does not route to this remote node;

 

 

otherwise, the packets are discarded. Select Yes to

 

 

enable and No to disable.

 

4-4

Remote Node Configuration