Chapter 12 Remote Management
System Timeout
There is a default system management idle timeout of five minutes (three hundred seconds). The NWA automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling.
12.4 The Telnet Screen
Use this screen to configure your NWA for remote Telnet access. You can use Telnet to access the NWA’s Command Line Interface (CLI).
Click REMOTE MGNT > TELNET. The following screen displays.
Figure 52 Remote Management: Telnet
The following table describes the labels in this screen.
Table 32 Remote Management: Telnet
LABEL | DESCRIPTION |
TELNET |
|
|
|
Server Port | You can change the server port number for a service if needed, however you must use the |
| same port number in order to use that service for remote management. |
|
|
Server | Select the interface(s) through which a computer may access the NWA using Telnet. |
Access |
|
|
|
Secured | A secured client is a “trusted” computer that is allowed to communicate with the NWA |
Client IP | using this service. |
Address |
|
| Select All to allow any computer to access the NWA using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to access |
| the NWA using this service. |
|
|
Secured | Select All to allow any computer to access the NWA using this service. |
Client MAC |
|
Address | Choose Selected to just allow the computer with the MAC address that you specify to |
| access the NWA using this service. |
|
|
Apply | Click Apply to save your customized settings and exit this screen. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
| 103 |
|
|