Chapter 2 Introducing the Web Configurator
default configuration file. This means that you will lose all the settings you previously configured. The password will be reset to “1234”.
Figure 12 The RESET Button
2.2.1 Methods of Restoring
You can erase the current configuration and restore factory defaults in two ways:
Use the RESET button to upload the default configuration file. Hold this button in for about 10 seconds (the lights will begin to blink). Use this method for cases when the password or IP address of the NWA is not known.
Use the web configurator to restore defaults (refer to Section 15.7 on page 123).
2.3 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Status screen.
| 21 |
|
|