BPS-120 User’s Guide

should be lit) when connecting external devices, then toggle the STANDBY/ACTIVE mode switch (shown in Figure 6) to active mode to update OUTPUT 1-6 priority and sense new power readings at the output ports. The ACTIVE LED should light.

You should toggle the front panel STANDBY/ACTIVE switch after turning the BPS-120 on, forcing it to sense and update its remote device power readings on OUTPUTs 1-6.

Figure 6 BPS-120 Front Panel STANDBY/ACTIVE

In general the BPS-120 may be in one of the following states: ACTIVE, STANDBY, or FAULT, as indicated by their corresponding front panel LEDs shown in Figure 6. The BPS-120 also includes advanced self-diagnostic monitoring features to ensure that its own circuitry is functioning normally; the PWR, TEMP, and FAN LEDs indicate these states. This information is described in Table 2.

Table 2 BPS-120 System States and Internal System Indicators

BPS-120

 

 

PWR

TEMP

FAN

STATE

 

 

 

 

 

 

 

 

 

 

 

ACTIVE

On: The

 

GREEN:

GREEN:

GREEN:

 

BPS-120 is

 

The BPS-120

The BPS-120

The BPS-

 

in ACTIVE

 

 

 

internal power

internal

120 internal

 

mode.

 

 

 

module is

temperature is

fans are

 

 

 

 

 

 

functioning

within normal

operating

 

 

 

normally.

limits.

normally.

 

 

 

 

 

 

STANDBY

On: The

 

RED:

RED:

RED:

 

BPS-120 is

 

The BPS-120

The BPS-120

The BPS-

 

in STANDBY

 

 

 

internal power

has an internal

120 internal

 

mode.

 

 

 

module has

over-

fan(s) are

 

 

 

 

 

 

failed.

temperature

not

 

 

 

 

problem.

operating

 

 

 

 

 

properly.

15