BPS-120 User’s Guide

Table 1 BPS-120 OUTPUT Port Connector(s) (1-6) Pin Definition

PIN NUMBER

DESIGNATION

 

 

1GND

2N/A

312V

412V

512V

612V

7GND

8GND

9N/A

10BPS present

11BPS Status0

12BPS Status1

13Power good

14GND

2.4 Front Panel and LED Displays

The BPS-120 defaults to STANDBY mode when the BPS-120 is switched on. Depress the front panel dual function STANDBY/ACTIVE switch to place the BPS-120 in active mode, capable of supplying power to remote devices.

System and remote power status information are shown on the front panel of the BPS- 120 using two groups of LED displays: the first group shown in Figure 6 monitors internal BPS-120 parameters and the system mode (standby/active), the second group of LEDs shown in Figure 7 shows status information for each of the six power OUTPUT ports.

Enabling backup power to any of six external devices is as simple as connecting the (supplied) system power cables from each OUTPUT 1-6 on the back panel of the BPS- 120 to external devices. Be sure the BPS-120 is in standby mode (the STANDBY LED)

14