5 Troubleshooting
None of the lights turn on after I install the EM- 422 and connect it to a network device.
•Make sure the EM-422 is properly installed in a switch.
•Make sure that you are using the XFP transceivers to con- nect the
•Make sure the power source is turned on.
•If the problem continues, contact your vendor.
6 Specifications
Specifications are accurate at the time of writing.
Feature | Specification |
Dimensions (mm) | 80 (Wide) x 168 (Deep) x 28 (High) |
|
|
Weight | 175 g |
|
|
Operating | Temperature: 0º C ~ 45º C |
Environment | Humidity: 10% ~ 90% RH |
|
|
Storage | Temperature: |
Environment | Humidity: 10% ~ 90% RH |
|
|
Power Supply | Use main board 3.3 V |
|
|
10 Gigabit | • Compliant with IEEE 802.3ae |
Ethernet Interface | • XFP transceiver |
|
|
7