ENGLISH

1 Introduction

This Quick Start Guide is for use with all ZyXEL Ethernet switches. Your device may differ from the illustrations below.

2 Installation

All switches can be used as a standalone device while some can alternatively be mounted on standard EIA racks.

Note: For proper ventilation, allow at least 4 inches (10 cm) of clearance at the front and 3.4 inches (8 cm) at the back of the switch. Leave space between switches if stacking.

2.1 Desktop Installation

1 Set the switch on a smooth, level surface.

2 If your switch comes with unattached rubber feet, attach them to each corner on the bottom of the switch. These

1