ENGLISH

3.2 Network Cables

You can use unshielded twisted pair (UTP) or shielded twisted-pair (STP) Ethernet cables for RJ-45 ports. Make sure the cable length between connections does not exceed 100 meters (328 feet). The following table describes the types of network cable used for different connection speeds.

Table 1 Network Cable Types

SPEED

NETWORK CABLE TYPE

10Mbps

100

Ω 2-pair UTP/STP Category 3,4 or 5

 

 

 

100Mbps

100

Ω 2-pair UTP/STP Category 5

 

 

 

1000Mbps

100

Ω 4-pair UTP/STP Category 5

 

 

 

The LNK/ACT LED should flash when data is being sent between your switch and a connected device.

3.3 Power Connection

Connect one end of the supplied power cable or power adaptor to the power receptacle on the switch and the other end to the appropriate power source. The PWR LED should turn steady on if the switch is receiving power.

4