ZyXEL Communications G-162 WEP, WPA, WEP, Step, Ad-Hoc, WPA-PSK, Disabled, Infrastructure, Table 3-10Profile: Select a Channel, Figure 3-10Profile: Select a Channel

ZyXEL G-162 User’s Guide

Figure 3-10 Profile: Select a Channel

The following table describes the labels in this screen.

	Table 3-10 Profile: Select a Channel
LABEL	DESCRIPTION
Channel	Select a channel number from the drop-down list box. To associate to an ad-hoc
	network, you must use the same channel as the peer computer.

Step 3. If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA or 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled to allow the G-162 to communicate with the access points or other peer wireless computers without any data encryption and skip to Step 5.

Using the ZyXEL Utility 3-17