ZyAIR G-5100

1 Use the installation tool to connect the ground cable to the ZyAIR’s frame ground. Connect the other end of the ground cable to an appropriate grounding system.

2 For initial configuration, use a cross-over Ethernet cable to connect the power injector’s DATA IN port to a computer.

3Connect the RJ-45 Ethernet connector end of the outdoor Ethernet cable to the power injector’s

POWER & DATA OUT port.

Connect the other end to the outdoor Ethernet port on the bottom of the ZyAIR (align the connector’s notch with the port’s inside bump).

4Use a power cord to connect the power injector’s power socket to an AC power source.

5Look at the front of the power injector. The POWER LED turns on first. Then the ACTIVE LED turns on and the ZyAIR starts.

3