ZyAIR G-5100

2 Use this wizard screen to configure one of the ZyAIR’s two wireless LAN (WLAN) adapters to function as an AP (WLAN 1 is recommended). Use the ADVANCED WIRELESS screens to configure a WLAN adapter for bridge/repeater functions.

Note: The wireless clients and ZyAIR must use the same SSID, channel ID and WEP encryption key (if you enable WEP) for wireless communication.

Enter a descriptive name (up to 32 printable 7- bit ASCII characters) for the wireless LAN

Click Scan to have the ZyAIR automatically select the optimum channel.

Select 64-bitor 128-bitto encrypt data frames before transmitting them over the wireless network. Select Disable to turn off WEP data encryption.

Select ASCII or HEX WEP key input method and then follow the on-screen instructions to set up the WEP keys. You must configure all four.

Note: Use the ADVANCED WIRELESS screens to configure stronger types of security (such as WPA).

.

3 If you have an IP address to use, select Use fixed IP address and enter it along with the subnet mask and gateway IP address.

Click Finish.

Note: If you change the ZyAIR’s IP address, you must use the new IP address to access the web configurator again.

7