Chapter 4 ZyXEL Utility Configuration
4.3.1.4.3 Certificate
Figure 24 Security Setting: IEEE 802.1x: Certificate
The following table describes the labels in this screen.
Table 12 Security Setting: IEEE 802.1x: Certificate
LABEL | DESCRIPTION |
Validate Server | Select the check box to check the certificate of the authentication server. |
Certificate | The fields below display only when the Validate Server Certificate check box is |
| selected. |
|
|
Certificate issuer | Select a trusted CA (certification authority) to accept only certificates signed by the |
must be | selected CA or select Any Trusted CA to accept certificates signed by any CAs. |
|
|
Allow | Select the check box to accept an intermediate certificate which is issued by the |
intermediate | Trusted Root CA. |
certificates |
|
|
|
Server name must | Enter the name of the authentication server. You can use up to 19 English |
be | keyboard characters. Spaces are allowed. |
|
|
Server name must | Select this option to allow only the authentication server whose server name is |
match exactly | exactly the same as what you configured above. |
|
|
Domain name | Select this option to allow only the authentication server whose domain name |
must end in | ends with what you configured above. |
specified name | For example, if you entered “org.com” in the Server name must be field, a server |
| with the domain name of either abc.org.com or 123.org.com is allowed. |
|
|
Back | Click Back to go to the Site Survey screen to select and connect to another |
| network. |
|
|
Save | Click Save to confirm your selections and advance to the Link Info screen. |
|
|
Exit | Click Exit to return to the Site Survey screen without saving. |
|
|
4.4 The Profile Screen
A profile is a set of wireless parameters that you need to connect to a wireless network. With a profile activated, each time you start the
If you do not configure and activate a profile, each time you start the
40 |
| |
| ||
|
|
|