ENGLISH

Look at the LEDs (Lights)

•The POWER () light blinks during start-up and stays green once the NBG41xW3G is ready.

•The LAN () and WAN () lights turn on and stay on if the corresponding con- nections are properly made.

•The WLAN () light turns steady green when the built-in Wi-Fi feature is enabled.

•The 3G OPERATION () light turns on when a 3G connection is made and the 3G SIG-

NAL STRENGTH () light indicates the signal strength. See the User’s Guide for more information on these lights.

Check your connections if the power () or LAN () light does not turn on. If this doesn’t help, disconnect the NBG41xW3G from its power source, wait for a few seconds and then reconnect the power.

2 Access the NBG41xW3G from Your Computer

Use the NBG41xW3G’s web configurator to configure settings on the NBG41xW3G.

1 Launch a web browser (such as Internet Explorer). Enter the NBG41xW3G’s default IP address, http://192.168.1.1, and press [ENTER].

2 Click Login (the default password 1234 is already entered).

5