The following table describes the labels in this screen.
Table 30 System Status
LABEL | DESCRIPTION |
|
|
System Name | This is the System Name you chose in the SYSTEM General screen. It is for |
| identification purposes |
Model Name | The model name identifies your device type. The model name should also be on a |
| sticker on your device. If you are uploading firmware, be sure to upload firmware |
| for this exact model name. |
ZyNOS Firmware | This is the ZyNOS firmware version and the date the firmware was created. |
Version: | ZyNOS is ZyXEL's proprietary Network Operating System. |
Ethernet Port |
|
|
|
IP Address | This is the Prestige’s IP address. This applies to both of the Prestige’s Ethernet |
| ports. |
IP Subnet Mask | This is the Prestige’s subnet mask. This applies to both of the Prestige’s Ethernet |
| ports. |
MGNT Port |
|
|
|
IP Address | This is the static IP address of the Prestige’s logical Ethernet interface for |
| management. |
IP Subnet Mask | This is the subnet mask of the Prestige’s logical Ethernet interface for |
| management. |
VoIP Status |
|
|
|
SIP1/SIP 2 | This is the SIP account configured on the Prestige. |
|
|
SIP Registration | This is the SIP registration status of the SIP account. |
Status | This field displays Registered when the Prestige has successfully registered the |
| SIP account with the SIP register server. |
| This field displays Not Registered when the Prestige has not successfully |
| registered the SIP account with the SIP register server. |
Register/ | Click Register to have the Prestige attempt to register the SIP account with the |
Unregister | SIP register server. |
| Click Unregister to delete the SIP account's registration on the SIP register |
| server. This removes the SIP registration server's SIP |
| domain name) mapping for this SIP account, it does not cancel your SIP account. |
Used Port | This field displays the Prestige’s listening port for SIP traffic on this SIP account. |
|
|
Custom Tone | IVR (Interactive Voice Response) is a feature that allows you to use your |
(IVR) Status | telephone to interact with the Prestige. You can use your phone to record custom |
| tones for the caller ringing and on hold tone functions. This field displays the |
| Remaining Time left for recording custom tones. |
10.3 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a "*.bin" extension, e.g., "Prestige.bin". The upload process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click MAINTENANCE in the navigation panel and then the F/W UPLOAD tab. Follow the instructions in this screen to upload firmware to your Prestige.
86 | Chapter 10 Maintenance |