P-2602HW(L)-DxA Series Quick Start Guide

1 Click INTERNET/WIRELESS SETUP.

2Wait while the P-2602HW(L)-DxA tries to detect your Internet connection. If the P-2602HW(L)- DxA cannot detect your Internet connection, follow the directions. Enter the information provided by your ISP. Keep the default settings if your ISP did not provide some information.

Make sure your wireless security settings are compatible with your existing wireless devices. See the User’s Guide for more information on wireless networks. If you want to set up OTIST, go to Section 3.2.

3When your Internet connection is setup correctly, the INTERNET light should be green. When you are finished click Return to Wizard Main Page.

3.2 Wireless Security and OTIST

ZyXEL's One-Touch Intelligent Security Technology (OTIST) feature allows you to automatically configure the SSID and WPA-PSK on all OTIST-equipped wireless clients within range of the P-2602HW(L)-DxA.

Note: If you enable OTIST but select Disable wireless security using the wireless wizard, the P- 2602HW(L)-DxA will create a WPA-PSK automatically.

If you enable OTIST and select Manually assign a WEP key using the wireless wizard, the P- 2602HW(L)-DxA will replace the WEP key with a WPA-PSK.

Enable OTIST only if your wireless clients support WPA and OTIST.

You must enable OTIST on the P-2602HW(L)-DxA and all wireless clients within three minutes in any order.

To start OTIST on the P-2602HW(L)-DxA, hold in the RESET button for one to five seconds. Do not hold the RESET button in for too long, as this will reset the P-2602HW(L)-DxA to the factory defaults. You can also start OTIST in the wireless wizard screen.

To enable OTIST on wireless clients, click Start in the Adapter screen. The Setup Key is 01234567 by default. If you have previously saved a setup key on the P-2602HW(L)-DxA, use it instead of the default.

For more information on wireless security and configuration, see Wireless LAN in the User's Guide.

6