P-2602HWNLI Quick Start Guide

2.1 Voice Setup

Note: You should have a voice account already set up.

Fill in the fields with information from your voice service provider. Leave the default settings in fields for which no information was provided (except if otherwise specified).

If you have a SIP account like 1234@VoIP-provider.com,“1234” would be the SIP Number and “VoIP- provider.com” would be the SIP Service Domain.

This screen configures SIP account 1.

Select the check box if you have a second

SIP account that you want to use.

2.2 Regular Phone Line Configuration

When one of your VoIP accounts is registered, the P-2602HWNLI normally uses the Internet (not the regular phone line) to make phone calls. Follow the directions in this section to make sure you can also use the regular phone line while one of your VoIP accounts is registered.

Note: When the P-2602HWNLI does not have power, only the phone connected to the PHONE 1 port can be used for making calls. Ensure you know which phone this is, so that in case of emergency you can make outgoing calls.

In the main screen, click VoIP > PSTN Line (or ISDN Line if you want to configure for an ISDN phone).

PSTN (or ISDN) Line Pre-fix Number: If you want to make a regular phone call after one of your VoIP accounts has been registered you have to dial this number before you dial the phone number.

Relay to PSTN (or ISDN) Line: Enter phone numbers for regular phone calls (that do not use the Internet) that you always want to dial without the prefix number. For example, enter emergency phone numbers here.

Click Apply.

7