P-2802HW(L)-Ix Series Quick Start Guide

3 If the connection test fails, the screen displays as shown. Check if your account is activated and click the link in the screen to go back to the wizard welcome screen to reconfigure or verify your Internet access settings.

STEP 2: Wireless LAN

After you configure the Internet access information, select Yes and click Next to configure wireless settings.

To create a wireless network the P-2802HW(L)-Ix and your wireless computer(s) must all use the same SSID (network name), channel and security settings.

If you do not set wireless security, any one within range could use your P-2802HW(L)-Ix to access your network and the Internet.

A Select the Active check box to enable the wireless LAN on the P-2802HW(L)-Ix. B Leave the Enable OTIST check box unselected.

C Choose WPA-PSK wireless security if your wireless device support it as it is stronger than WEP.

D If you select either WEP or WPA-PSK security (recommended), follow the directions to enter the appropriate key. Click Next to continue.

E Click Apply to save your wireless LAN settings.

FUse the read-only summary table to check whether what you have configured is correct and write down your wireless LAN settings for later use. Click Return to Wizard Main Page.

9