| ENGLISH |
|
|
PROBLEM | CORRECTIVE ACTION |
Cannot access the | Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with |
from my computer (continued). | JavaScript enabled. |
| Make sure you enter the password correctly (the field is case sensitive). |
| If you’ve forgotten the Mer produkthjalp finns pa http://www.support.zyxel.se’s |
| password, use the RESET button. Press the button in for about 10 seconds (the |
| WAN light turns off and then on again), then release it. It returns the |
| the factory defaults (password is 1234, LAN IP address 192.168.1.1 etc.). |
|
|
Cannot access the Internet. | Verify the Internet connection settings in the wizard. Make sure you entered the |
| correct user name and password if you are using PPPoE or PPPoA. |
|
|
This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address. This ensures that your computer can communicate with your Mer produkthjalp finns pa http:// www.support.zyxel.se. Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh computer operating systems.
1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and
3
4Select Internet Protocol (TCP/IP) (under the General tab in Win XP) and click Properties.
5The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows XP).
6 Select the Obtain an IP address automatically and Obtain DNS server address automatically options.
7 Click OK to close the Internet Protocol (TCP/IP) Properties window.
8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.
9 Close the Network Connections screen.
Viewing Your Product’s Certifications
1Go to www.zyxel.com.
2Select your product from the
3Select the certification you wish to view from this page.
17