ENGLISH

2 Accessing the Web Configurator

1 Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If the login screen does not display, check your browser’s security settings (see Troubleshooting for details) or make sure your computer is set to receive an IP address dynamically (see Set Up Your Computer’s IP Address).

2 The Password window displays. Enter the password (“1234” is the default) and click Login.

4Click Go to Wizard setup to set up your P-334WH (in router mode) for the first time.

Click Go to Advanced setup to use main menus to configure advanced features, such as operating mode.

3 Change the password in the screen that follows and click Apply.

3 Operating Mode

The P-334WH supports three operating modes: Router, Access Point and WiFi WAN Router.

Router (default): Select this mode if the P-334WH is connected to a broadband DSL/cable modem. NAT allows all LAN computers to access the Internet using the same public IP address.

WiFi WAN Router: In this mode, the P-334WH works similarly as a Router, but uses a wireless WAN connection via an access point (AP) or wireless router, instead of a wired connection via a DSL/cable modem. In this mode, the P-334WH does not allow network access to wireless clients (WLAN).

Access Point: In this mode, the P-334WH works as a Router without routing features (such as NAT), firewall, content filtering, etc.

5