ENGLISH

The LEDs

Look at the top panel LEDs. When you connect the power, the PWR LED blinks and stays on once the device is ready.

The LAN, WAN and WLAN LEDs turn on if the corresponding connections are properly made.

2 Accessing the Web Configurator

1 Launch your web browser. Enter “192.168.1.1” as the web site address.

Note: If the login screen does not display, check your browser’s security settings (see Troubleshooting for details) or make sure your computer is set to receive an IP address dynamically (see Set Up Your Computer’s IP Address).

2 The Password window displays. Enter the password (“1234” is the default) and click Login.

4Click Go to Wizard setup to set up your P-334WHD (in router mode) for the first time.

Click Go to Advanced setup to use main menus to configure advanced features, such as operating mode.

3 Change the password in the screen that follows and click Apply.

5