ZyXEL Communications P-334WHD Note:, Auto or No Wireless Security

ENGLISH

•None security: Have no wireless LAN security configured. If you do not enable any wireless security on your P- 334WHD, your network is accessible to any wireless networking device that is within range.

•Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net- work. The higher the WEP Encryption, the higher the security but the slower the throughput.

•Extend (WPA-PSK or WPA2-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wire- less clients support WPA-PSK or WPA2-PSK respectively.

Note: The wireless clients and P-334WHD must use the same SSID, channel ID and WPA(2)-PSK (if WPA(2)-PSK is enabled) or WEP encryption key (if WEP is enabled) for wireless communication.

Auto or No Wireless Security

A Enter a unique name to identify the P-334WHD in the wireless LAN. B Select a wireless security level. Choose Auto or None.

C The P-334WHD automatically scans for and selects a channel not in use by a nearby device. The P-334WHD and wireless client must use the same channel.

D If you select Auto and click Next, a screen pops up displaying the generated pre-shared key. Click OK to continue. You can also view the generated pre-shared key in the Wireless LAN > General screen.