ZyXEL Communications P-660H-TX

P-660H-Tx v2 Support Notes

(3) WWW/Telnet service is enabled but your host IP is not the secured host

entered in Web Configurator, Advanced setup, Advanced -> Remote

MGNT:

(4)A filter set which blocks WWW/Telnet from WAN is applied to WAN node.

You can check by command:

wan node index [index #]

wan node display

4. Why can't I upload the firmware and configuration file using FTP over

WAN?

(1) When the firewall is turned on, all connections from WAN to LAN are

blocked by the default ACL rule. To enable FTP from WAN, you must turn

the firewall off or create a firewall rule to allow FTP connection from WAN.

The WAN-to-LAN ACL summary will look like as shown below.

Source IP= FTP host

Destination IP= P-660H-Tx v2's WAN IP

Service= FTP TCP/21, TCP/20

Action=Forward