Appendix A Product Specifications and Wall Mounting
P-660HW-Dx User’s Guide 269
Wall-mounting Instructions
Complete the following steps to hang your ZyXEL Device on a wall.
"See the Hardware Specifications table for the size of screws to use and how far
apart to place them.
1Select a high position on a sturdy wall that is free of obstructions.
2Drill two holes for the screws.
3Be careful to avoid damaging pipes or cables located inside the wall when drilling holes
for the screws.
4Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
5Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyXEL Device with the connection cables.
6Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the
ZyXEL Device on the screws.
Figure 150 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting.
All measurements are in millimeters (mm).