Chapter 3 Wizard Setup for Internet Access
P-660HW-Dx User’s Guide
64
Figure 31 Manually assign a WEP key
The following table describes the labels in this screen.
5Click Apply to save your wireless LAN settings.Figure 32 Wireless LAN Setup 3
Table 16 Manually assign a WEP key
LABEL DESCRIPTION
Key The WEP keys are used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
Enter any 5, 13 or 29 ASCII characters or 10, 26 or 58 hexadecimal characters ("0-9",
"A-F") for a 64-bit, 128-bit or 256-bit WEP key respectively.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.