| |
|
|
PROBLEM | CORRECTIVE ACTION |
Cannot access the | Check the cable connection from your computer to the Prestige. |
Prestige from my | Make sure your computer’s IP address is in the same subnet as |
computer. | the Prestige’s IP address (see Section 4.1 on page 17). |
| Ping the Prestige from a computer on the LAN. Make sure your |
| computer’s Ethernet adapter is installed and functioning |
| properly. In the computer, click Start, (All) Programs, |
| Accessories and then Command Prompt. In the Command |
| Prompt window, type "ping" followed by the Prestige’s LAN IP |
| address (192.168.1.1 is the default) and then press [ENTER]. |
| The Prestige should reply; otherwise see Section 4.1 on page |
| 17. |
| If the Prestige’s IP address has changed, then enter the new |
| one as the URL. |
| Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 |
| and later with JavaScript enabled. |
| Make sure you enter the password correctly (the field is case |
| sensitive). |
| If you’ve forgotten the Prestige’s password, use the RESET |
| button. Press the button in for about 10 seconds (or until the |
| PWR/SYS LED starts to blink), then release it. It returns the |
| Prestige to the factory defaults (password is 1234, LAN IP |
| address 192.168.1.1 etc.; see your User’s Guide for details). |
|
|
16