1 DSL: Connect the Prestige to a telephone jack using a telephone wire.
2LAN 10/100M: Use an Ethernet cable to connect a computer to the LAN port for initial configuration and/or Internet access.
3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source.
After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS LED then turns steady on if the testing is successful. The 10/100M LED turns on if the LAN port is properly connected.
2 Configuration for Internet Access
You may configure the Prestige for Internet access in any one of these ways:
•Configuration Genie
•Zero Configuration
•Web Configurator Internet Access Wizard
3