•Zero Configuration
•Web Configurator Internet Access Wizard
Note: Configuration genie or Zero configuration are only able to configure the device automatically for Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a
If you’re not using these Internet access settings, then use the Web Configurator Internet Access Wizard to manually configure the device.
You will need your Internet access information such as user name and password if given by your ISP.
INFORMATION From ISP | ENCAPSULATION METHOD YOU ARE USING |
None | RFC1483 in bridged mode with a dynamic IP address or |
| ENET ENCAP with a dynamic IP address |
|
|
An IP address only | RFC1483 in routing mode with a static IP address |
|
|
A user name and password (and an IP address) | PPPoA or PPPoE encapsulation (with a static IP address) |
|
|
An IP address, subnet mask and a gateway IP | ENET ENCAP with a static IP address |
address |
|
|
|
2.1 Configuration Genie
From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the installation tutorial or from “Multimedia Auto Provisioner” in the CD.
2.2 Zero Configuration
Launch your web browser and navigate to any web site (for example, www.zyxel.com). The Prestige automatically detects and configures your Internet connection. This may take about two minutes.
If you have a PPPoE or PPPoA connection, a screen displays prompting you to enter your Internet account information. Enter the username, password and/or service name exactly as provided. Click Apply.
3