Overview
Use the included CD or follow the directions in this Quick Start Guide to set up your
How to use the included CD
This CD provides
1 On the included CD, click Multimedia Auto Provisioner > Installation Tutorial. 2 At the end of the tutorial, click Configuration Genie.
1 Hardware Connections
1Use a telephone wire to connect your
2Use an Ethernet cable to connect a computer to an ETHERNET port for Internet access.
3Use the power adaptor provided with your
4Push in the POWER button. Look at the lights on the front panel.
•The POWER light blinks green while your
•The DSL light stays on if a physical connection with the ISP is established. The INTERNET light stays on when Internet access is available and blinks when the
•Each ETHERNET light stays on if the corresponding ETHERNET port is properly connected, and blinks when there is traffic.
•The WLAN light stays on if the wireless network is ready, and blinks when there is traffic.
2