2Drill two holes for the screws (M3*10). The centers of the holes should be 108 mm apart.
Note: Be careful to avoid damaging pipes or cables inside the wall when drilling holes for the screws.
3Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.
4Make sure the screws can hold the weight of the
5Align the holes on the back of the
4 Specifications
Values are accurate at the time of writing.
Table 1 Device Specifications
Feature | Specification |
DSL Port | |
| |
|
|
ETHERNET Port | |
| 10/100 Mbps |
| |
|
|
Power Supply | AC 9 V, 1 A |
|
|
Power Consumption | 7 W |
|
|
5